FREE DEMO
Get us now for your solution provider
Oil Skimmer
Application
Oil skimmers are pieces of equipment that remove oil floating on the surface of a fluid. Oil skimmers are usually all that is necessary to remove oil from a liquid. In some cases, however, oil skimmers may be used to pre-treat a fluid.
In this case, the oil skimmers remove as much of the oil as possible before more expensive and time-consuming measures are employed. Oil skimmers are simple, dependable, and effective tools for removing oil, grease and other hydrocarbons from water and coolants.
PROBLEM
Late respond to control any leak detection or accident happen.
Pre-treating the fluid involved the high cost of cleaning the liquid.
Late recovery time to control any spillage due not knowing thickness & viscosity of liquid to act as low/high alarm level.
SOLUTION
Install Leakwise sensor to control Skimmer start to respond remove any Oil thickness appear.
Be a One Stop Solution by Leakwise Sensor integration with oil Skimmer to control spillage damage.
Leakwise sensor can detect leaks which may occur in pipes, flanges, valves and tanks.
PRODUCT SOLUTION
ID 223
Specification
Detection Range 0.3 - 20 mm (0.01 - 0.8 in) of hydrocarbon on water or brineWater Level Variation Depends on sensor sub-model
Water Temperature 0 - 70 degree celsius (32 - 158 degree)
ID 225
Specification
Oil Monitoring Range ID-225/100: 1 – 100 mm (0.04 – 4.0 in); ID-225/200: 1 – 200 mm (0.04 – 8.0 in)Water Level Variation Minimum: 30 cm (~12 in) above well/tank/sump bottom.
Water Temperature 0 – 70 °C (32 – 158 °F); no freezing
